Note

It is recommended to make the priority settings at a keyframe point at which the two images are not overlapping.

•During the course of a transition, there is a “dead zone” corresponding to the intermediate point of the whole effect (see following figure), during which the image does not change. Therefore, it is necessary to create the effect so that the image in the intermediate part of the transition is the keyframe for the mid-point of the whole effect. The range of this “dead zone” corresponds to the central one-third of the range of the transition indicator. This also applies to an auto transition.

Change in image through transition

 

 

Keyframe effect

 

 

Image at point C

 

 

 

 

 

 

 

appears

A

B

C

 

 

 

 

 

 

 

 

Image at point B

First keyframe

 

Last keyframe

 

 

appears

 

 

Mid-point of effect

 

 

(dead zone)

Image at point A appears

Transition indicator

Fader lever

•Create the last keyframe for each channel as follows.

Channel 1: since the priority is low, it will not be visible on the screen, so no particular restrictions apply.

Channel 2: create the image full-size.

•In the <Transition Mode> group of the Key Frame >DME User PGM menu, select [P In P].

Wipes DME 6 Chapter

Creating User Programmable DME Patterns 487