Key Wipe: The operation applies to wipes in the independent key transition control block.

3 Using any of the following methods, select the data to be copied or swapped.

•Press directly on the list in the status area.

•Press the arrow keys to scroll the reverse video cursor.

•Turn the knobs to make the setting.

Knob

Parameter

Adjustment

Setting values

 

 

 

 

1

Left No

Select data for copy/swap

1 to 4 a)

 

 

source

1 to 16 b)

2

Right No

Select data for copy/swap

1 to 4 a)

 

 

destination

1 to 16 b)

a)Transition control block wipe data

b)Independent key transition control block wipe data

For details of the data affected, see “Copy and Swap” (page 98).

4 To copy, press [Copy], and to swap, press [Swap].

This carries out the copy or swap.

To undo a copy or swap

Press [Undo], to return to the state before the copy or swap was carried out.

Copy by Button Operation

You can carry out the following copy operations by a simple button operation.

•M/E copy

•Keyer copy

•Wipe copy

•DME wipe copy

For an overview of the copy function, see “Copy and Swap” (page 98).

Basic button operation

The basic button operation is to hold down the copy source button, then press the destination button.

You can undo the last operation using [Undo] in the menu (see page 545).

Swap and Copy 9 Chapter

Basic Copy and Swap Operations 545