At this point, if auto side flags are on, this automatically adds side flags to the 4:3 video material. (See “Settings for Switcher Configuration (Config Menu)” in Chapter 16 (Volume 2).)
3 Use either of the following methods to turn the side flags on.
•Use the Misc >Enable >Side Flags menu. (See page 550)
•Use a
This adds side flags to the 4:3 video material.
Safe Title Settings
Switching the safe title function on or off
1 In the menu control block, press the top menu selection button [MISC] and select VF2 ‘Safe Title.’
The Misc >Safe Title menu appears.
2 Using any of the following methods, select the signal to which the settings apply.
•Directly press the list in the status area.
•Press the arrow keys to scroll the reverse video cursor.
•Turn the knob to make the setting.
Knob | Parameter | Adjustment | Setting values |
|
|
|
|
1 | Output | Signal to which the settings | 1 to 48 |
|
| apply |
|
|
|
|
|
Notes
•It is not possible to change the setting for the output for which the safe title is set off in a Setup menu.
•The safe title function cannot be used for output signals for which through mode is set to Enable in a Setup menu.
For more information about the Setup menu settings referred to above, see “Signal Input Settings (Input Menu)” and “Signal Output Settings (Output Menu)” in Chpater 16 (Volume 2).
3 Press [Safe Title] to set it on or off.
552 Misc Menu Operations