Applying a wide key border
1 In the
2 Press [Wide Key Border], turning it on.
3 Adjust the following parameters.
Knob | Parameter | Adjustment | Setting values |
|
|
|
|
1 | H | Simultaneously adjust border | 0.00 to +100.00 |
|
| width of left and right edges |
|
|
|
|
|
2 | V | Simultaneously adjust border | 0.00 to +100.00 |
|
| width of upper and lower edges |
|
|
|
|
|
3 | All | Simultaneously adjust border | Value of H shown |
|
| width of all four edges |
|
|
|
|
|
4 | Soft a) | Softness of border | 0.00 to +100.00 |
5 | Density | Density of border | 0.00 to +100.00 |
|
|
|
|
a) Shared with the drop shadow “Soft” value.
4 To add an outline, press [Out Line], turning it on. 5 To adjust the border color, press [Border Color]. 6 Set the color parameters.
For details, see “To apply color to a border” (page 426)
Applying a drop shadow
1 In the
2 Press [Drop Shadow], turning it on.
3 Set the parameters.
The valid ranges of the parameter values depend on the combination of signal format (SD/HD) and aspect ratio (4:3/16:9) selected in the system, as follows.
• SD format
428 Resizer