Wipe from a 4:3 image to a 16:9 image

Side flag areas

16:9 image

4:3 image (Side flags on)

Wipe from a 4:3 image to another 4:3 image (when side flags are on for both images)

Side flag areas

 

Side flag areas

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4:3 image (Side flags on)

The circles indicate the

 

position of the wipe pattern

 

edge when the transition is

 

half finished.

DME Wipe Action for an Image With Side Flags

When a DME wipe is carried out on an image with side flags, all wipe patterns can be used.

Depending on the setting (On/Off) of [Auto Crop] in the Engineering Setup >Switcher >Config menu, the appearance of the 4:3 image changes.

Notes

•When using the MVE-9000/MVE-8000A through SDI interface with [Auto Crop] being off, side flags are not added to the new image during DME wipe.

•For signals with the following DME wipe pattern selected on the DME external video bus (gray part shown in the pattern illustration), side flags are not applied when auto side flags are set to Off.

–Two-channel page turn

–Two-channel page roll

104 Side Flags