If, in the Setup menus, you set insertion and deletion as independent modes, make the settings for the next transition in the independent key transition control block.
Separate settings are required both when inserting a key and when deleting it. For example, with the key not inserted, if you select the transition type and carry out a transition, this will be the setting when inserting a key.
2 Carry out the transition in the independent key transition execution section.
To insert or delete the key gradually with a mix or wipe transition: Press the [TAKE] button.
To set the independent key transition rate using a
To cut the key in or out instantaneously: Press the [KEY 3 ON] button or [KEY 4 ON] button.
Note
In an independent key transition, the pattern limit function is not available.
376 Simple Transition