A negative parameter value produces pincushion distortion, and a positive value produces barrel distortion.

Spiral

This deforms the pattern spirally.

Spiral off

Spiral on

•The parameter Magnitude determines the size and direction of the spiral. A value of –100.00 represents the maximum movement in the counterclockwise direction, and a value of +100.00 represents the maximum movement in the clockwise direction.

•The parameter Wave Speed determines the speed of the lateral waves.

A value of –100.00 represents the maximum speed to the left, and a value of +100.00 represents the maximum speed to the right.

Wipe Snapshots

You can snapshot and save a wipe pattern together with the current settings of its modifiers and pattern limit in a dedicated register for recall when required. There are 10 wipe snapshot registers on each M/E bank and the PGM/PST bank.

Use the Flexi Pad control block in each switcher bank or the Menu control block to save and recall wipe snapshots. (For details, see “Wipe Snapshots” (page 460).)

For simple transitions (see page 371), there are eight wipe snapshot registers on each M/E bank and the PGM/PST bank.

Wipe Modify Clear

By a simple operation, you can return the wipe state to that set in initial status.

For details of the menu operation to return the wipe state to that set in initial status, see “Returning to default state in function groupings” (page 324).

Wipes 71