Item | Main | Sub |
|
|
|
Operation setting for | Same as standard mode | Cannot be used |
switcher GPI inputs and |
|
|
outputs |
|
|
|
|
|
a) Keys 2 to 4 are common to main and sub.
Notes
•Allow a transition to complete before carrying out main and sub delegation switching.
•The sub background A bus (utility 2 bus) is shared with wipe edge border fill. Making a change to one affects the other.
•Even if the wipe border width is set to the same numeric value for main and sub, the same image is not obtained.
•Changing the position of the wipe pattern for sub also changes the pattern size.
Restrictions on Using Multi Program 2 Mode
•The following functions are not available for sub:
–Data copy and swap
–Default recall (except for parametric recall)
–M/E link
–[TRANS] button function (see page 268)
–[TRACE] button function (see page 270)
–[AUTO] button function (see page 309)
•
However, this restriction can be removed. For details, see “Enabling re- entry between the main and sub sides of the same M/E bank” (page 240).
•In the following cases, a transition using the fader lever may not be performed correctly:
–When the main and sub bus toggle modes are set differently
–For a pattern mix, preset color mix, and so on
•For an Internal bus link, GPI link, or External bus link, the “Utility 2” bus cannot be selected.
•Screen aspect, show key, and [MCRO ATTCH ENBL] button settings are common to main and sub.
•If a snapshot is recalled simultaneously for main and sub, or a keyframe is executed simultaneously for main and sub, then for the following common to main and sub the main settings are reflected.
–Key
–M/E Config
–DME external video bus and utility 1 bus
Multi Program 2 243