aNext transition selection buttons Press these buttons, turning them on, to determine what the next transition will apply to.
BKGD: Next transition changes the background.
KEY1 to KEY4 (DSK1 to DSK4 in the PGM/PST bank): Press this button, turning it on, to make the next transition insert or remove the corresponding key (keys 1 to 4). If a key is currently inserted it will be removed, and vice versa.
In the PGM/PST bank, this inserts or removes downstream keys 1 to 4.
KEY PRIOR (priority): When this button is lit, the setting of the key priority after the next transition is enabled. The key priority after the next transition appears in the key status display.
ALL: Pressing this button turns on a preselected set of the [BKGD], [KEY1] to [KEY4], and [KEY PRIOR] buttons. Make this setting in a Setup menu.
bTransition type selection buttons You can assign these buttons in setup to any transition type (see “Overall Control Panel Settings (Config Menu)” in Chapter 16 (Volume 2)).
Press one of these buttons, turning it on, to determine the type of the next transition. When
MIX: In a background transition, the new video fades in as the current video fades out. During the transition, the overall signal level is maintained at 100%.
In a key transition, the key fades in (for insertion) or out (for removal).
NAM
the signal with the higher luminance level is given priority in the output. The current video is maintained at 100% output for the first half of the transition as the new video increases progressively to 100%, then the current video is progressively reduced from 100% to zero in the second half while the new video is maintained at 100%.
SUPER MIX: The current video is maintained at 100% output for the first half of the transition as the new video is mixed while increasing progressively to 100%. The current video is then progressively reduced from 100% to zero in the second half while the new video is maintained at 100%.
PST (preset) COLOR MIX: In the first transition, the current video is replaced by the color matte in a mix (dissolve), then in the second transition the color matte is replaced by the new video also in a mix (dissolve).
In place of a color matte, you can select any signal on the utility 2 bus.
WIPE: The current video is replaced by the new video, using the wipe pattern selected in the Wipe menu.
DME: A wipe type of transition is carried out, using the DME effect selected in the DME Wipe menu.
FM1&2ClIP, FM3&4ClIP, FM5&6ClIP, FM7&8ClIP: A recorded clip is played back together with the transition. At this point, you can also carry out a transition (wipe or mix (dissolve)) simultaneously together with the clip.
cTransition execution section Transition indicator: This comprises multiple LEDs, which show the
progress of the transition.
Fader lever: Move this to carry out a manual transition. Pressing the [KF]
Names and Functions of Parts of the Control Panel 261