Sony 8000SF, MVS8000 manual 32

Button numbers in the auxiliary bus control block

																															2ND button
1, 2, 3, 4, .......														(1st row)										....... 29, 30, 31							121		124
																															LEVEL	LEVEL	LEVEL	LEVEL	RTR
																															1	2	3	4
AUX	AUX	AUX	AUX	AUX	AUX	AUX	AUX	AUX	AUX	AUX	AUX	AUX	AUX	AUX	AUX	AUX	AUX	AUX	AUX	AUX	AUX	AUX	AUX	AUX	AUX	AUX	DME	DME	FM	FM	EDITDEST	MCRO	MCRO	MCRO	2ND
1	2	3	4	5	6	7	8	9	10	11	12	13	14	15	16	17	18	19	20	21	22	23	24	25	26	27	UTIL1	UTIL2	1	2	PVW	1	2	3
																															SHIFT				KEY
																															M/E	M/E	M/E	P/P	XPT
																															1	2	3		HOLD
																															M/E	M/E	M/E	P/P	XPT
																															1	2	3		HOLD
32, 33, 34, 35, .......														(2nd row)										....... 60, 61, 62							125		128

When the [2ND] button is unlit

The cross-point buttons and reentry buttons in the auxiliary bus control block have separate upper (1st row) and lower (2nd row) numbers.

In the case of a 32-button layout, the button numbers are as follows.

Auxiliary bus control block button numbers ([2ND] button unlit)

Button	Button	Button numbers
1st row	From the left end to the 31st button	1 to 31
	Reentry buttons	121 to 124
2nd row	From the left end to the 31st button	32 to 62
	Reentry buttons	125 to 128

When the [2ND] button is lit

Different buses can be assigned to the 1st-row buttons and 2nd-row buttons. When the 32nd button is set as a shift button, the 1st-row buttons and 2nd-row buttons both have the following button numbers.

Auxiliary bus control block button numbers ([2ND] button lit)

Button	Number when the shift	Number when the shift
	button is not pressed	button is pressed
From the left end to the 31st	1 to 31	32 to 62
button
Reentry buttons	121 to 124	125 to 128

Inhibiting cross-point button operations

For each cross-point button, you can temporarily inhibit operations.

Functions 8000-MVS 1 Chapter

Signal Selection 31