Wipes DME 6 Chapter

2 Select the desired DME wipe pattern group with one of the following buttons.

In two-channel mode, only Page Turn and Page Roll are selectable.

•Slide/Squeeze: slide and squeeze

•Split/Door: split and door

•Mirror/Sphere: mirror and sphere

•Character Trail: character trail

•Wave/Ripple: wave and ripple

•Page Turn/Roll: page turn and page roll

•Frame I/O: frame in/out

•2D Trans/3D Trans: 2D Trans and 3D Trans

•Sparkle/Split Slide: sparkle and split slide

•User Program: user programmable DME

For details of DME wipe patterns, see “Types of DME Wipe Pattern” (page 72) and “DME Wipe Pattern List” in Appendix (Volume 1) (page 566).

The patterns from the selected pattern group appear on the screen.

3 Press the button to select the desired pattern.

Setting Independent Key Transition DME Wipe Modifiers

You can add modifiers such as pattern position and size for an independent key transition DME wipe.

For introductory information, see “Positioner” (page 80) and “Size” (page 81).

Setting the DME wipe position (Positioner)

For applicable pattern numbers, see page 80.

1 In the <Position> group of the Key1 DME Wipe Adjust menu, press [Position], turning it on.

2 Set the following parameters.

Knob

Parameter

Adjustment

Setting values

 

 

 

 

1

H

Horizontal position

–200.00 to +200.00

 

 

 

 

2

V

Vertical position

–200.00 to +200.00

 

 

 

 

478 DME Wipe Settings for Independent Key Transitions