Key Edge Modifications
To modify the key edge of key 1 on the
1 In the
The Edge menu appears.
2 Select the edge type in the <Edge> group.
For an overview of the key edge modifications, see “Edge modifiers” (page 52).
Normal: unadorned edge
Border: edge with border applied
Drop Border: edge with drop border applied
Shadow: edge with shadow applied
Outline: edge used as outline
Emboss: embossing effect applied to edge
If you select [Normal], skip to step 7.
3 Set the border width and other parameters.
When border or outline is selected: The setting parameters depend on the key type and whether the separate edge function is enabled or not. To enable the separate edge function, press [Separate Edge], setting it on.
• Separate edge off
Knob | Parameter | Adjustment | Setting values |
|
|
|
|
1 | Width | Width | 0.00 to 8.00 a) |
|
|
| (0.00 to 100.00) b) |
3 | Density | Density | 0.00 to 100.00 |
|
|
|
|
a)In the “4H mode” and when [Fine Key] (page 393) is on, the setting value range is 0.00 to 4.00.
b)When a wipe pattern key or key wipe pattern key is selected as the key type
•Separate edge on
The left, right, top, and bottom border or outline widths can be adjusted
390 Key Setting Operations Using Menus