This returns the settings within the function grouping to the default state, and the [Default Recall] button goes off.

Note

2 Press the knob parameter button you want to return to the default state.

This returns the knob parameter value to the default state, and the [Default Recall] button goes off.

The default state of the settings depends on the setting of the initial status mode, set in the Setup menu of system setup, as follows. User: The state when [Initial Status Define]

is executed.

Factory: Factory default settings

Returning knob parameters to default state

1 Press the [Default Recall] button, turning it on.

This enters the menu default recall mode.

Notes

•In the following table, “Menus allowing a return to default settings,” the default recall function does not apply to some knob parameters. For details, see the table, “Knob parameters subject to restriction on default recall” on page 328.

•The default recall function does not return the horizontal (H) and vertical (V) position settings to their default state individually. Returning the horizontal

(H) position to its default state also returns the vertical (V) position to its default state automatically, and vice versa. For details, see the table, “Knob parameters subject to restriction on default recall” on page 328.

and Menus 2 Chapter

Menus allowing a return to default settings

Top menu selection button

VF number

Menu number

Menu name

name

(HF number)

 

 

 

 

 

 

M/E1

VF1

1110-series

Key1 a)

 

VF2

1120-series

Key2 a)

 

VF3

1130-series

Key3 a)

 

VF4

1140-series

Key4 a)

 

VF5

1150-series

Wipe a)

 

VF6

1160-series

DME Wipe a)

 

VF7

1170-series

Misc a)

Panel Control

Basic Menu Operations 325