Note
For the SDI interface on the
For details, see “Interfacing With External Devices (Device Interface Menu)” in “Setup Relating to Switcher Processor” section of Chapter 16 (Volume2).
DME Wipe Pattern Variation and Modifiers
You can modify the selected DME wipe pattern in the same way as an ordinary wipe pattern, as follows.
For the setting operations, see “Setting DME Wipe Modifiers” (page 469).
Direction: You can set the DME wipe direction to normal, reverse, or alternating normal/reverse (page 64), except for a key transition, which is always in normal/reverse mode. However, a key transition can only be specified when the following patterns are selected, and when other patterns are selected, this is fixed, as normal/reverse.
Patterns: 1204, 1207, 1221 to 1224
Edge: You can apply a border or soft border (see page 65).
In the case of those user programmable DME patterns for keys in which an edge has already been applied to the effect, the bahavior is as follows.
•When the DME wipe edge setting is on, only part of the edge applied in the effect is enabled, and that portion can be adjusted (page 470).
•When the DME wipe edge setting is off, the edge applied in the effect is enabled as is.
Note
In an
Positioner: You can move the DME wipe pattern or center of the effect to an arbitrary position. Using the position select function, you can also instantaneously move the pattern.
•1031
When this pattern number is selected, with the progress of the transition the pattern center automatically moves initially from the set position toward the center of the screen (see page 65). In other words, the effect obtained is the same as in a normal wipe with the positioner set to “AUTO CENTER”.
•1201 to 1208, 1221 to 1224, 1251
When these pattern numbers are selected, you can set the pattern position when the first transition completes.
80 DME Wipes