•Video Proc Memory: Enable or disable video process memory.

•Show Key: Enable or disable show key for edit preview, M/E and P/P Pvw/ K-Pvw.

•Key Auto Drop: For each switcher bank (M/E-1 to M/E-3, PGM/PST), specify a key to be turned off automatically when you press a cross-point button for the bus to be output as the background.

•Mask/Border Process: Set the processing order of masks and borders for each M/E or P/P bank.

•Key Priority: Set the key priority operation mode for each of the M/E and P/P banks. In DSK mode, the key priority is fixed.

•Xpt Hold mode: Set the operation mode for the cross-point hold button provided on the key bus for each of the M/E and P/P banks.

•Pattern Limit Transition: Set the operation mode when the pattern limit is released for each of the M/E and P/P banks.

•Wipe Edge Default: Adjust the wipe edge softness for each of the M/E and P/P banks.

•CCR Internal Signal Enable: Select whether signals generated internally to the switcher can be select as input material to the color corrector. (MVS- 8000G/8000GSF only)

•FM Auto Store: Switch on or off the function to automatically attach a name and save in frame memory.

Link settings (Link)

•Internal Bus Link: Make a setting of the bus link function that links together two buses internal to the switcher.

•GPI Link: Make settings for linking any cross-point buttons or [CUT] and [AUTO TRANS] buttons in the cross-point control block and GPI output ports.

•M/E Link: Make settings to link together two M/E banks.

•Key Trans Link: Make settings to link key transitions.

External device connections (Device Interface)

•Remote Assign: Set the use of the four 9-pin ports.

•GPI Input: Set the GPI input ports and trigger polarities, and make the action settings.

•GPI Output: Set the GPI output ports and trigger polarities, and make the action settings.

•Aux Control: Set whether operations on the AUX buses from the four 9-pin ports are inhibited.

•DME Type Setting: When the DME is an MVE-9000 or MVE-8000A, carry out interface settings, and for an SDI interface set the AUX bus outputs and reentry inputs.

Setup 201