to is a VTR/disk recorder, the start point updated by the setting of the [TIMELINE] button is as follows.
When the [TIMELINE] button is On: start point of the timeline
When the [TIMELINE] button is Off: start point of Cueup & Play
STOP TC: Press this button to set the timecode of the stop point at that time. The timecode of the stop point is updated to the current time each time this button is pressed.
When the device the operation applies to is a VTR/disk recorder, the stop point updated by the setting of the [TIMELINE] button is as follows.
When the [TIMELINE] button is On: stop point of the timeline
When the [TIMELINE] button is Off: stop point of Cueup & Play
SET START TC, SET STOP TC, SET DUR: When pressed, these buttons light green, “START TC”, “STOP TC” or “DUR” appears in the numeric keypad control block display, and you can enter a timecode from the numeric keypad. If you enter a numeric value and press the [ENTER] button, the button goes off, whereas if you press the [ENTER] button without entering a numeric value the numeric keypad control block display shows
STB (standby) OFF: When pressed, this button flashes amber, and the device selected with the device selection
buttons exits from the standby mode. This button cannot be used for frame memory clip operations.
CUE: When pressed, this button flashes amber together with the [ALL STOP] button, and the device selected with the device selection button is cued up to the start point of the material. When more than one device is selected, the amber flashing continues until the reference device is cued up, and when the cueing up is finished, this button lights green.
REW: When pressed, this button lights amber, and material of the device selected with the device selection buttons is rewound. To stop during the rewind, press the [STOP] button or [ALL STOP] button.
PLAY: When pressed, this button lights amber, and the device selected with the device selection buttons plays. The playback stops not only if the [STOP] button is pressed, but also if any of the [STB OFF], [SHTL], [JOG], [CUE], [REW], [PLAY], [FF], and [ALL STOP] buttons is pressed. When the [VAR] button is pressed while the device is playing back, the device plays at one times normal speed in variable mode.
FF:When pressed, this button lights amber, and the material of the device selected with the device selection buttons is fast forwarded. To stop during the fast- forward, press the [STOP] button or
[ALL STOP] button.
ALL STOP: When pressed, all device material playback and other operations stop. During cueing up of any of the devices, this button flashes amber, and when all cueing up operations are completed, it lights green.
REC: When pressed simultaneously with the [PLAY] button, this button lights red (the [PLAY] button lights amber),
280 Names and Functions of Parts of the Control Panel