For the method of obtaining an install key, contact your Sony representative. To obtain a key, you may be required to submit the unique device ID of the switcher you are using. You can check the unique device ID in the Install menu of the switcher.

For details of the operation, see “Installation and Device Setup (Install/Unit Config Menu)” in Chapter 16 (Volume 2).

Assigning main and/or sub to switcher banks

For Multi Program 2 operations, a single switcher bank may be shared, and switched between main and sub, or two separate switcher banks may be used, each dedicated to main or sub.

Example 1: Assigning M/E-1 main and sub to a single switcher bank, and switching between them

Used switched between M/E-1 main and sub

Example 2: Assigning separate switcher banks as “M/E-1 main dedicated” and “M/E-1 sub dedicated”

Used for M/E-1 main operations

Used for M/E-1 sub operations

Video creation operations in Multi Program 2 mode

For each of main and sub, there are differences from the operations in standard mode.

Functions 8000-MVS 1 Chapter

Multi Program 2 231