Copy and Swap

You can copy and swap the settings among the M/E-1 to M/E-3, and PGM/PST banks or between keyers.

The following settings can be copied or swapped.

•Overall settings for the M/E-1 to M/E-3, and PGM/PST banks

•Keyer settings

•Wipe settings in a transition control block

•Wipe settings in an independent key transition control block

•DME wipe settings in a transition control block

•DME wipe settings in an independent key transition control block

•Matte data (color 1, color 2, and how to compose them)

•Color settings

•DME channel settings

•Format converter input settings (copy only)

•Format converter output settings (copy only)

You can carry out copy operations with a simple button operation. Swap operations, and copy operations on DME data can only be done with a menu operation.

For details of the operations, see Chapter 9 “Copy and Swap” (page 543) and for color correction settings, “Copy and Swap Operations” in Chapter 19 (Volume 2).

M/E copy and M/E swap

You can copy and swap the overall bank settings among the M/E-1 to M/E-3, and PGM/PST banks.

Target bank

Target data

 

 

M/E-1

Bank settings excluding the following data items:

M/E-2

•

Setup data

M/E-3

•

Flexi Pad settings

PGM/PST

•

Snapshots

 

•

Keyframe effects

 

•

Key snapshots

 

•

Key memory

 

 

 

Note

If a DME is being used on the source M/E bank, then if for example there are insufficient DME channels, it may not be possible to select the DME.

There are no such restrictions on a swap.

98 Copy and Swap