In the same way as for the main pattern, select the sub pattern.
The patterns that can be selected for the sub pattern depend on the pattern selected for the main pattern (see the following table).
Possible combinations of main pattern and sub pattern
Yes: Combination possible No: Combination not possible
Main | Sub pattern |
|
|
|
| |
pattern |
|
|
|
|
| |
Standard | Enhanced | Rotary | Mosaic | Random/ | ||
| ||||||
|
|
|
|
| diamond | |
|
|
|
|
| dust | |
|
|
|
|
|
| |
Standard | Yes | Yes | No | Yes | Yes | |
|
|
|
|
|
| |
Enhanced | Yes | Yes | No | Yes | Yes | |
|
|
|
|
|
| |
Rotary | No | No | No | No | No | |
|
|
|
|
|
| |
Mosaic | Yes | Yes | No | No | Yes | |
|
|
|
|
|
| |
Random/ | Yes | Yes | No | Yes | No | |
diamond |
|
|
|
|
| |
dust |
|
|
|
|
| |
|
|
|
|
|
|
Select HF2 ‘Pattern Mix.’
The Pattern Mix menu appears.
4
5
In the <Pattern Mix> group, select the type of pattern mix.
Mix: mix
+Nam: positive Nam
Morphing: morphing
For an overview of types of pattern mix, see page 61.
Depending on the selection in step 4, set the following parameters.
• When mix, positive Nam, or negative Nam is selected
Knob | Parameter | Adjustment | Setting values |
|
|
|
|
1 | Mix Ratio | Proportion of sub pattern to the | 0.00 to 100.00 |
|
| main pattern |
|
|
|
|
|
• When morphing (see page 61) is selected |
| ||
|
|
|
|
Knob | Parameter | Adjustment | Setting values |
|
|
|
|
2 | Start | Point in transition at which main | |
|
| pattern is at 100% |
|
|
|
|
|
3 | End | Point in transition at which sub | |
|
| pattern is at 100% |
|
|
|
|
|
442 Basic Procedure for Wipe Settings