Key Type Setting

Setting the key type in a menu

1 In the M/E-1 >Key1 menu, select HF1 ‘Type.’

The Type menu appears.

2 In the <Key Type> group, select the key type.

Luminance: luminance key

Linear: linear key

Chroma: chroma key

Color Vector: color vector key

Wipe Pattern: wipe pattern key

Key Wipe Pattern: key wipe pattern key

For the selected key type, you can now set the parameters.

For an overview of the key types, see page 48.

3 Carry out the following settings as required, depending on the key type selected in step 2.

To enable clean mode (see page 49) for a luminance key, linear key or color vector key: Select [Clean Mode] so that it is set on.

When clean mode is enabled, key fill is added to the background without cutting out with key source.

When chroma key is selected: Select [Chroma Adjust] to access the Chroma Adjust menu (see page 382), and make the required settings.

When a wipe pattern key is selected: In the M/E-1 >Wipe menu (see page 438), select the pattern and set any modifiers, then return to the M/E-1 >Key1 menu.

When a key wipe pattern key is selected: In the M/E-1 >Key1 > Transition >Wipe Adjust menu (see page 455), carry out pattern selection and modifier setting, then return to the M/E-1 >Key1 >Type menu.

Note

For a wipe pattern selected for a wipe pattern key or key wipe pattern key, the [Edge] and [Direction] modifier settings are not available.

4 Set the parameters.

• When a luminance key or linear key is selected

Keys 4 Chapter

Key Setting Operations Using Menus 379