ALL: Select all regions. When any region is already selected, pressing this button makes all regions unselected.
M/E 1 to M/E 3, P/P: Select the corresponding regions,
USER 1 to USER 8: Select a User region.
DME1 to DME8: Select a DME channel.
GPI: Select the GPI region.
RTR:Select the router region.
DEV1 to DEV12: Select the Device 1 to Device 12 regions respectively.
MCRO: Select the macro region.
cFunction selection buttons
UNDO: After recalling a register, press this button to return to the state before recalling the register.
STORE STATS (store status): This lights amber when data is stored in a register. After saving data to a register, hold down this button and press the [UNDO] button to return the register to the state before the data was saved.
TC (timecode): Press this button, turning it on, to switch transition rate entry to the timecode entry mode.
STORE: Press this button to switch to the mode for saving a snapshot, effect, shotbox or macro in a register.
RCALL (recall): Press this button to switch to the mode for recalling a snapshot, effect, shotbox or macro from a register.
[STORE] button or [RCALL] button flashes amber when one or more of the regions assigned to the Region selection buttons are not selected by the Region Select menu.
dNumeric keypad
In addition to the buttons for numeric input, this includes buttons for adding attributes to snapshots.
0 to 9: Used to input numeric digits.
. (period): Enters the decimal point. When the [TRANS RATE] button is lit, enters “00.” When the [EFF] button, [SNAPSHOT] button or [SHOTBOX] button is lit, this is used to find an empty register.
When the [SNAPSHOT] button is lit, applies the effect dissolve attribute to a snapshot.
CLR/AUTO TRANS (clear/auto transition): Clear an input value, returning to the previous state. When the [SNAPSHOT] button is lit, applies the auto transition attribute to a snapshot.
TRIM/GPI ENBL (enable): After entering a difference value to be added to an existing setting, press this button to confirm the change.
ENTER: Confirm an entered value.
eDisplay
This shows the selected region name and entered numeric values.
286 Names and Functions of Parts of the Control Panel