Transitions 3 Chapter

Selecting the Transition Type by a Menu Operation

You can also select the required transition type by a menu operation.

1 In the M/E or PGM/PST menu, select first VF7 ‘Misc,’ then HF1 ‘Transition.’

The Transition menu appears.

2 Select the required transition type in the <Transition Type> group.

The parameter settings can now be adjusted with the knobs according to the selected transition type.

For details, see the following.

•“Super Mix Settings” (page 349)

•“Color Matte Settings” (page 350)

•“Setting the Transition Rate” (page 352)

Note

When multi-program mode is selected in the Setup menu (see “Settings for Switcher Configuration (Config Menu)” in Chapter 16 (Volume 2)), there may be cases in which two or more transition types have been selected.

348 Selecting the Transition Type by a Menu Operation