Notes
•A pattern limit only applies when a wipe or DME wipe is selected as the transition type.
•A pattern limit cannot be applied to an independent key transition (see page 364).
| ON | ON | ON | ON | |
| 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 | ||||
BKBD | KEY1 | KEY2 | KEY3 | KEY4 | |
KEY | MIX |
| NAM | SUPER | |
PRIOR |
| MIX | |||
|
|
| |||
| PST |
|
|
| |
ALL | COLOR |
| WIPE | DME | |
| MIX |
|
|
| |
PRIOR | NORM | NORM | REV | TRANS | |
SET | /REV | PVW | |||
|
| ||||
TRANS PVW button |
|
|
|
| |
|
|
| AUTO | CUT | |
|
|
| TRANS | ||
PTN LIMIT
LIMIT SETKF
PTN LIMIT button
LIMIT SET button
Transition control block (standard type)
Setting the pattern limit with the fader lever
1 Move the fader lever to the position corresponding to a particular pattern size.
•First make sure that the [PTN LIMIT] button is off.
•To check the pattern size on the preview monitor, first press the [TRANS PVW] button, to select the transition preview mode (see page 363).
2 Press the [LIMIT SET] button.
This sets the current fader lever position as the pattern limit.
Setting the pattern limit by a menu operation
1 When a wipe is selected as the transition type, in the M/E or PGM/PST menu, select first VF5 ‘Wipe,’ then HF4 ‘Edge/Direction.’
When a DME wipe is selected as the transition type, in the M/E or PGM/ PST menu, select first VF6 ‘DME Wipe,’ then HF4 ‘Edge/Direction.’
The Edge/Direction menu appears.
356 Executing a Transition