Flip-flop mode

A BLACK

B BLACK

Bus fixed mode

ABLACK

B

 

Fader

BLACK

lever

 

 

Buttons lit

A BLACK

B BLACK

Flip-flop mode and bus fixed mode

For details of fader lever operation in bus fixed mode, see page 361.

Transition preview

With the preview output of the M/E banks and PGM/PST bank, you can check the effect of a transition in advance. To carry out a transition preview, press the [TRANS PVW] button in the transition control block. (See “Transition Preview” (page 363).)

Note

In multi-program mode, DSK mode (page 199) or bus fixed mode (page 45), it is not possible to carry out a transition preview.

Pattern limit

When a wipe or DME wipe pattern is selected for the transition, you can specify the range of movement of the wipe pattern through the course of the transition, for each bank independently.

When the pattern limit function is enabled, carrying out a transition results in the following effect for example settings.

•When the limit value is set to 50%, the effect at the end of the transition is the same as when the fader lever is at the center position in the normal case (with the pattern limit function disabled); the wipe pattern does not complete.

•When the limit value is set to 0%, the wipe effect is completely disabled, and carrying out the transition produces no change in the image.

46 Transitions