Knob | Parameter | Adjustment | Setting values |
|
|
|
|
1 | Top | Top edge width | 0 to 8 a) |
2 | Left | Left edge width | 0 to 8 a) |
3 | Right | Right edge width | 0 to 8 a) |
4 | Bottom | Bottom edge width | 0 to 8 a) |
a) In the “4H mode” and when [Fine Key] (page 393) is on, the setting value range is 0 to 4.
To adjust the edge fill color
When [BDR] is selected, the [MORE] button lights amber. Pressing the [MORE] button to turn it green then allows you to adjust the edge fill color parameters with the knobs.
Knob | Parameter | Adjustment | Setting values |
|
|
|
|
1 | Luminance | Luminance | 0 to 100 |
|
|
|
|
2 | Saturation | Saturation | 0 to 100 |
|
|
|
|
3 | Hue | Hue | 359 to 0 |
|
|
|
|
4 | Density | Density | 0 to 100 |
|
|
|
|
Setting the drop border or shadow parameters
When the [DROP BDR] or [SHDW] button is lit green, the parameter settings differ between the “key drop OFF” and “key drop ON” modes (see page 54) as shown below. Switching between these two modes is made by turning the [KEY DROP] button on or off.
• “Key drop OFF” mode
Knob | Parameter | Adjustment | Setting values | |
|
|
|
|
|
1 | Width | Width | 0 to | 8 a) |
2 | Position | Position | 359 to 180 | |
|
|
|
|
|
4 | Density | Density | 0 to | 100 |
|
|
|
|
|
a) In the “4H mode” and when [Fine Key] (page 393) is on, the setting value range is 0 to 4.
• “Key drop ON” mode
Knob | Parameter | Adjustment | Setting values | |
|
|
|
|
|
1 | Width | Width | 0 to | 8 a) |
2 | Position | Position | 359 to 0 | |
|
|
|
|
|
4 | Density | Density | 0 to | 100 |
|
|
|
|
|
a) In the “4H mode” and when [Fine Key] (page 393) is on, the setting value range is 0 to 4.
Key Setting Operations With the Key Control Block | 411 |
|
|