Button assignment settings (Prefs/Utility)
Assign the [PREFS 1] to [PREFS 16] buttons in the menu control block, the utility/shotbox control block buttons, and the
•User Preference: Make the settings for the user preference buttons in the menu control block.
•Utility Module Assign: Make the utility/shotbox control block settings.
•KEY 2/4 Bus Button Assign: Make the settings for the key 2 row buttons in the
External device connections (Device Interface)
•GPI Input: Set the GPI input ports and trigger type, and make the action settings.
•GPI Output: Set the GPI output ports and trigger type, and make the action settings.
•
•DCU Serial Port Assign: Assign the devices (disk recorder/VTR/Extended VTR) connected to a DCU and accessible from the control panel to the [DEV1] to [DEV12] buttons which become operative when you press the [DEV] button on the device control block. For a disk recorder or Extended VTR, you can also make settings relating to sharing of file lists. Further, you can make settings for devices (disk recorder/VTR/Extended VTR) operable from an editing keyboard.
•Editor Port Assign: When the
Operation settings (Operation)
•Button Tally: Set whether or not the system tally generation results are reflected in the panel tally.
•Trans Rate Display: Select whether the transition rate display mode is in frames or timecode units.
•
•Effect: For keyframe effects, you can make the following settings. (See Chapter 13 “Keyframe Effects” (Volume 2).)
–Recall mode
–Automatically turning off the [EDIT ENBL] button when an effect is recalled
–Automatic insertion of a first keyframe when an empty register is recalled
–Effect Auto Save
–Default KF Duration
–Setting whether or not to replay the first keyframe after rewinding a GPI/
Setup 197