Assigning a DME output signal as a monitor signal
1 In the Processed Key menu, press [Monitor].
The Monitor menu appears.
2 Press [Monitor Set], turning it on.
3 In the <DME Select> group, select the DME channel (DME1 to DME8) to be used.
This assigns the selected DME output to DME MON V and DME MON K. The colors with which [DME1] to [DME8] are lit show the key assignment status.
Lit green: DME currently being monitored
Lit amber: DME that can be monitored
Off: Unassigned DME
Specifying the Key Output Destination
Using the key processed keyer signals (external processed key)
To select the key processed keyer key fill and key source signals on the AUX buses, press [Ext Proc Key], turning it on, in the Processed Key menu.
This assigns the key fill and key source signals for
Note
You cannot select the PROC V and PROC K signals using the
Using the key processed keyer signals or signals to which a DME effect is applied in frame memory (frame memory feed)
To use the key processed keyer key fill and key source signals on the frame memory source buses, in the Processed Key menu, press [FM Feed]. [Ext Proc Key] turns on, and the key fill and key source signals processed on the currently selected keyer are automatically assigned to frame memory source buses 1 and 2. When a DME is selected on the keyer, the key fill and key source signals to which a DME effect is applied are assigned.
Key Setting Operations Using Menus 403