of the source name display, for each source separately. You can set the source name display mode and background color in a Setup menu.

fSHIFT button

When this button is enabled, either the source name displays show the shifted signal names, or the shifted signals for all buses in this M/E (P/P) bank are enabled. You can select either mode in a Setup menu.

Each press of the button toggles between the enabled and disabled states.

In the case of a module without source name displays, when “Display” is selected in the Setup menu, this button is invalid.

gM/E bank display

This indicates the notional mix/effect bank name to which the particular M/E or PGM/ PST bank is assigned, as a four-character identifier.

hMacro buttons

PRE MCRO (pre macro) button: Use this button to set a macro attachment in pre macro mode. For setting in macro only mode, use this in combination with a macro only set button assigned to the utility/shotbox control block or a user preference button. Alternatively, without using the button, you can make the selection simply, by pressing simultaneously with the [POST MCRO] button.

When dual background bus mode is selected in setup, this switches the dual background bus mode on and off. When set to utility/shotbox mode, this enables and disables the use of the key 2 row as a utility/shotbox.

If in setup this is assigned to the function for disabling cross-point button operations, then it enables or disables cross-point button operations.

POST MCRO (post macro) button: Use this button to set a macro attachment in post macro mode. For setting in macro only mode, use this in combination with a macro only set button assigned to the utility/shotbox control block or a user preference button. Alternatively, without using the button, you can make the selection simply, by pressing simultaneously with the [PRE MCRO] button.

When dual background bus mode or utility/shotbox mode is selected in setup, this button is disabled.

If in setup the function for disabling cross-point button operations is assigned to the [PRE MCRO] button, then this button is disabled.

MCRO ATTCH ENBL (macro attachment enable) button: When this button is on, the macro attachments set for the buttons of the M/E bank are enabled.

Panel Control and Menus 2 Chapter

Names and Functions of Parts of the Control Panel 259