Output level | White balance adjustment | Output level |
|
|
Gamma correction
Input level | Input level |
Knee correction
Black balance adjustment
Unadjusted signal Adjusted signal
It is also possible to mask part of the region to be corrected.
Secondary color correction
For the six colors R (red), G (green), B (blue), Y (yellow), C (cyan), and M (magenta), adjust the luminance and saturation, and also the hue within a range of ±30 degrees of the center value for each color.
You can mask a part of the region to be corrected.
Note
This function is disabled when spot CCR is enabled with a setup setting. For details, see “Installation and Device Setup (Install/Unit Config Menu)” in Chapter 16 (Volume 2).
On the
RGB clip
For each of the R, G, and B signals, you can make dark clip and white clip adjustments.
Luminance processing
After converting a signal to which RGB color correction has been applied to a YUV signal, dividing the luminance levels into three regions, referred to as
224 Color Corrector