Press the [ENTER] button.
Numeric keypad control block
1 In the numeric keypad control block, press the [TRANS RATE] button.
2 Press the region selection button for the M/E or PGM/PST bank for which you want to set the transition rate, turning it on.
The numeric keypad control block display now shows the selected region name and the current transition rate setting for the region.
3 With the numeric keypad, enter the transition rate.
If required, press the [TC] button to toggle the input mode (frame input or timecode input).
Region selection buttons TC button
3 Press the [ENTR] button.
This confirms the entry, and the new setting appears in the transition control block display.
Setting the transition rate in the numeric keypad control block
|
| TRANS RATE button |
| Display | Numeric keypad | ||||
EFF | SNAP | SHOT | MCRO | TRANS | UNDO |
|
|
|
|
SHOT | BOX | RATE |
|
|
|
| |||
|
|
|
|
|
|
| |||
MASTR |
| ALL | GP1 | STORE |
|
|
|
| |
| STATS |
|
|
|
| ||||
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
| +/- |
|
|
|
|
|
| 7 | 8 | 9 | EFF |
|
|
|
|
|
|
| |||
M/E | M/E | M/E | P/P |
| TC |
|
|
| DISS |
1 | 2 | 3 |
|
|
|
| |||
|
|
|
|
|
|
|
|
| CLR |
USER | USER | USER | USER |
|
| 4 | 5 | 6 | AUTO |
RTR |
|
|
|
| TRANS | ||||
1 | 2 | 3 | 4 |
|
|
|
| ||
|
|
|
|
| |||||
|
|
|
|
|
|
|
|
| TRIM |
DME | DME | DME | DME | DEV | STORE | 1 | 2 | 3 | XPT |
|
|
| ENBL | ||||||
1 | 2 | 3 | 4 | 1 |
|
|
|
| |
DME | DME | DME | DME | DEV | RCALL | 0 |
|
| ENTER |
5 | 6 | 7 | 8 | 2 |
|
| |||
|
|
|
|
| |||||
ENTER button
•Enter a value of up to three digits.
•To clear the entry, press the [CLR] button.
4
354 Executing a Transition