Press the [POS] button, turning Position on.

To set the wipe position using the trackball or joystick

You can also set the wipe position using the trackball or joystick in the device control block.

1 In the device control block, press the [M/E1], [M/E2], [M/E3], or [P/P] button, turning it on.

The buttons in the device control block are assigned to the wipe position setting as follows.

 

 

Table 1: Buttons and assigned settings

 

 

 

Button name

 

Setting

 

 

 

 

K1

CB1

 

Wipe position for independent key 1 transition

 

 

 

 

K2

CB2

 

Wipe position for independent key 2 transition

 

 

 

 

K3

FM1

 

Wipe position for independent key 3 transition

 

 

 

 

K4

FM2

 

Wipe position for independent key 4 transition

 

 

 

 

 

 

Table 2: Buttons assigned to functions

 

 

 

Button name

 

Function

 

 

 

POS

 

Toggle Position on or off.

 

 

 

X, Y

 

Fix the operating direction.

 

 

 

CTR

 

Return the pattern position to the center of the screen.

 

 

 

 

2 Press one of the buttons in Table 1 above, to select the wipe position to which the operation applies. Multiple selection is possible.

3

4 Move the trackball or joystick, to set the wipe position. By pressing the [X] button, turning it on, you can restrict movement to the horizontal direction, and by pressing the [Y] button, turning it on, you can restrict movement to the vertical direction.

To set the wipe position by a menu operation

1 Press [Position] in the Key1 Wipe Adjust menu, turning it on.

2 Set the following parameters.

Knob

Parameter

Adjustment

Setting values

 

 

 

 

1

Position H

Horizontal position

–200.00 to +200.00 a)

2

Position V

Vertical position

–200.00 to +200.00 a)

Wipes 5 Chapter

Wipe Settings for Independent Key Transitions

457