5 Press [Set].
This assigns the signal.
Restrictions when using a dual link
When using a dual link, the switcher and DME resources are linked in duplex (link A and link B), resulting in the following restrictions.
Restrictions | Details | |
|
| |
Functions that cannot be | Functions of the following items in the Engineering | |
used in the system | Setup >Switcher >Config menu | |
| Single Simul, Dual Simul | |
|
|
|
Functions that cannot be | • | Primary inputs numbers 41 to 80 |
used in the switcher | • | Outputs number 25 to 48 |
| • | Monitor buses 2/4/6/8 |
| • | |
| • | |
| • DME utility 1 and 2 buses | |
| • Color background 2 b) | |
| • | Color corrector 2 |
| • | Frame memory |
| • | Format converter |
| • Functions of the following items in the Engineering | |
|
| Setup >Switcher >Config menu |
|
| Switching Timing, M/E Config excluding Standard, and |
|
| Logical M/E Assign |
|
|
|
Functions that cannot be | • | DME channels 3, 4, 7, and 8 |
used on the DME | • | Freeze in film mode |
| • “Freeze Timing” in the following effects | |
|
| Input Freeze, Trail, Decay, KF Strobe (always set to |
|
| Frame) |
| • | Brick |
| • Editor ports 3 and 4 when the editor port operation mode | |
|
| is set to “Independent.” |
|
|
|
Other restrictions | • | Auto chroma keying operates on the image of link A. |
| • Tallies are generated for the link A signal. | |
| • Key frames are created in units of two frames. | |
| • It is not possible to change the interpolation method in | |
|
| the DME. |
|
|
|
a)When the simple P/P software is not installed
b)When the switcher is a 2M/E system only
Dual Link Support 247