•When turning [Speed] on in the <Rotation> group and rotating the pattern at a constant speed
Knob | Parameter | Adjustment | Setting values |
|
|
|
|
1 | Speed | Rotation rate of pattern |
a) See page 66.
6 To interchange color 1 and color 2, press [Color Invert], turning it on.
Applying the zabton effects
1
2 Adjust the following parameters.
Knob | Parameter | Adjustment | Setting values |
|
|
|
|
1 | Size | Pattern size | 0.00 to 100.00 |
|
|
|
|
2 | Soft | Pattern edge softness | 0.00 to 100.00 |
|
|
|
|
3 | Density | Density | 0.00 to 100.00 |
|
|
|
|
Note
If in the pattern selection described below you select “Mask Pattern,” and “Box” for the main mask, the “Size” parameter here cannot be adjusted. Set “Size” in the Main Mask menu.
3 To adjust the pattern and color, press [Zabton Adjust].
The Zabton Adjust menu appears.
4 In the <Zabton Pattern> group, select the pattern.
Key Wipe: Use a key wipe.
You can change this pattern by pressing [Pattern Select] to open the menu for key wipe pattern selection (Pattern Select menu), and make adjustments by pressing [Pattern Adjust] to open the menu for pattern adjustment (Wipe Adjust menu).
Key Edge Pattern: Use a color mixing pattern for key edge.
You can change this pattern by pressing [Pattern Select] to open the menu for edge color mix dedicated wipe pattern selection (Mix Pattern Select menu), and make adjustments by pressing [Pattern Adjust] to open the menu for pattern adjustment (Matte Adjust menu).
Mask Pattern: Use the main mask Box or Pattern.
You can also press [Pattern Select], and in the corresponding pattern adjustment menu, change the pattern.
396 Key Setting Operations Using Menus