Device Control Block (Trackball)
The description below of frame memory | DME, for wipe pattern position setting, and |
clip operations applies only to the MVS- | for VTR/disk recorder/frame memory clip |
8000A/8000G. | operation. |
The device control block is used for three- |
|
dimensional transform operations using a |
|
5MENU button
1Region selection buttons
3 Trackball
M/E1 | M/E2 | M/E3 | P/P | USER | DEV |
DME1 | DME2 | DME3 | DME4 |
| RSZR |
| CTRL | ||||
|
|
|
|
| |
DME5 | DME6 | DME7 | DME8 | RUN |
|
CTRL |
| ||||
|
|
|
|
| |
MENU | LOCAL | GLB | SRC | TRGT |
|
K1 | K2 |
| |||
K3 | K4 |
| |||
| CB1 | CB2 |
| ||
|
|
|
| ||
AXIS | ASP | LOC | LOC | ROT |
|
LOC | PERS | SIZE | XYZ | POS |
|
MAIN | SUB | ASP | LOC | RSZR |
|
SHIFT | CLR | X | Y | Z | CTR |
WORK | |||||
| BUFR |
|
|
|
|
2 Operating buttons 4
aRegion selection buttons
The operation mode allocated to the device control block depends on the selection state of the region selection buttons.
When the [M/E 1], [M/E 2], [M/E 3], and [P/P] buttons are selected: This enables the wipe pattern position setting (positioner) operation mode in the device control block. You can select multiple buttons simultaneously.
When the [USER] button is selected: This enables pattern position setting used for color backgrounds.
When the [DME 1] to [DME 8] buttons are selected: This enables the three- dimensional transform operation mode in the device control block.
Press a button, turning it on, to select a DME channel. You can select multiple buttons simultaneously.
The number of valid buttons depends on the number of DME processor channels installed.
When the [DEV] button is selected: This enables the VTR/disk recorder/frame memory operation mode in the device
Names and Functions of Parts of the Control Panel 271