Wipes 5 Chapter

Knob

Parameter

Adjustment

Setting values

 

 

 

 

2

Position V

Vertical position of pattern

–200.00 to +200.00 a)

a) See page 65.

Making a wipe pattern like a Venetian blind (Pairing)

1 In the M/E-1 >Wipe menu, select HF5 ‘Main Modify.’

The Main Modify menu appears.

2 In the <Pairing> group, select the slit direction.

H:Create slits in the horizontal direction.

V:Create slits in the vertical direction.

3 Set the following parameters.

Knob

Parameter

Adjustment

Setting values

 

 

 

 

1

Width

Width of the slits

1 to 128 (integer)

 

 

 

 

2

H Offset

Spacing in the horizontal direction

–100.00 to +100.00 a)

3

V Offset

Spacing in the vertical direction

–100.00 to +100.00 a)

a) See page 68.

Applying modulation to the wipe pattern (Modulation)

You can apply modulation independently to the main pattern and sub pattern.

Note

When using 1080PsF mode in an HD system, the modulation function is not available.

1 In the M/E-1 >Wipe menu, select HF5 ‘Main Modify.’

The Main Modify menu appears.

2 Depending on the desired effect, in the <Modulation> group select one of the following.

H:Modulate the pattern, applying waviness in the horizontal direction to

edges.

V:Modulate the pattern, applying waviness in the vertical direction to

edges.

Fringe: Modulate the pattern, applying waviness in the radial direction to edges.

452 Basic Procedure for Wipe Settings