Edge
You can apply a border to the pattern, soften the edges, or soften the applied border.
In an independent key transition, only the “Soft” setting is available.
Border | Soft | Soft border |
Border: You can adjust the border width.
Soft: You can adjust the edge softness.
Soft border: You can adjust the border width, and the softness of the inner and outer edges of the border.
When a border or soft border is selected, the signal filling the border is called edge fill. For the edge fill, you can use a matte generated by the dedicated color matte generator, or the signal selected on the utility 2 bus. A matte can include color 1 and color 2, and a combination of the two colors (a “color mix”).
Positioner
You can move the wipe pattern to any position.
Positioner off | Positioner on |
•The parameter H Position controls the horizontal position of the pattern.
A negative value moves the pattern to the left, and a positive value moves the pattern to the right.
•The parameter V Position controls the vertical position of the pattern.
A negative value moves the pattern down, and a positive value moves the pattern up.
Rotation
You can rotate the pattern. There are three rotation modes, as follows.
Wipes 65