Independent Key Transitions
Key source name display/key snapshot buttons
Key delegation buttons | KEY1 | KEY2 | KEY3 KEY4 | EMBL | |
|
|
|
|
| |
Independent key transition type | MIX | WIPE | DME | ENBL | STORE |
|
|
|
|
selection buttons
| KEY1 | KEY2 | KEY3 | KEY4 |
| ON | ON | ON | ON |
Independent key transition |
|
|
|
|
execution section | TRANS | TRANS | TRANS | TRANS |
| AUTO | AUTO | AUTO | AUTO |
Independent key transition control block (standard type)
To set independent transitions for the keyers on the M/E or PGM/PST bank, use the independent key transition control block.
For an overview of the independent key transitions, see page 37.
Basic Independent Key Transition Operations
1 Select one or more of the delegation buttons [KEY1] to [KEY4] ([DSK1] to [DSK4] in the PGM/PST bank), turning them on.
You can press more than one button at the same time.
2 Select the transition type.
To fade a key in or out: Press the [MIX] button, turning it on.
To insert or delete a key using a dedicated wipe pattern: Press the [WIPE] button, turning it on.
To insert or delete a key using a dedicated DME wipe pattern: Press the [DME] button, turning it on.
If, in the Setup menus, you set insertion and deletion as independent modes, make the settings for the next transition in the independent key
364 Independent Key Transitions