Functions 8000-MVS 1 Chapter

For details, see “Differences Between Multi Program 2 Mode and Standard Mode” (page 242).

Sequence of Operations in Multi Program 2

Basic operation sequence

Enter the BZS-8200 install key (first time only)

↓

Set Multi Program 2 operating mode for each switcher bank

↓

Assign output signals, and set the background configuration, key configuration, and key preview configuration

↓

For each switcher bank, make a main/sub assignment (one of main dedicated, sub dedicated, and main and sub shared)

↓

For a switcher bank assigned to main and sub shared, assign the [MAIN] and [SUB] delegation buttons

↓

Create the main and sub images

↓

Execute the transition

Optional operations

•Making cross-point settings

•Enabling DME wipe operations for sub

•Inhibiting utility 2 bus signal selection

•Including Multi Program 2 data in keyframes and snapshots

•Changing the key assignment for each output

•Assigning sub preview output to preview selection buttons in the fade-to- black control block

•Changing the matrix size to Standard

•Making settings for keyframe timeline operation

Basic Operations (Required)

Entering the BZS-8200 install key (first time only)

After installing the BZS-8200 Multi Program 2 software in the switcher, carry out the following procedure.

232 Multi Program 2