•When a macro attachment is set on the DME utility 1 bus or DME utility 2 bus, it is not possible to make separate main and sub settings.
•When snapshots with different M/E Config settings are recalled:
–If M/E Config data is not to be included in the snapshot data, the current system settings are used for snapshot reproduction.
–If M/E Config data is to be included in the snapshot data and if it was created before Version 5.30, then standard mode is used. If created in Version 5.30 or later, first M/E Config data is set, and then other snapshot data is recalled.
•The bus override function is only available on the following buses:
–
–
–P/P Main PGM/PST bus
–P/P Sub PGM/PST buses
•When a master snapshot or master timeline is executed with a key being assigned to both main and sub, it is uncertain which data will be reflected.
•When recalling a master snapshot with different register numbers for main and sub, the recall timing may differ by one field or more between main and sub.
•The link state is maintained even when M/E Config is changed. Set the link setting again, as required.
•Since keys 2 to 4 are shared between main and sub, when the main and sub fader lever positions are different, if you move the fader lever, the video changes instantaneously to the value of the most recently moved fader lever.
•When the transition type for main or sub is set to preset color mix, it is not possible to carry out independent key transition operation (common to main and sub).
244 Multi Program 2