Sony 8000SF, MVS8000 Clip Transition Operations

Memory Frame 7 Chapter

Clip Transition Operations

For an overview of clip transitions, see “Frame Memory Clip Function” (page 92).

Notes

•The clip transition function is only supported by the MVS-8000A/8000G.

•When a clip transition is selected as the transition type, if one of the wipe direction selection buttons in the transition control block is lit, it indicates the direction of clip playback.

Setting a clip transition

The following example describes the case of a clip transition using FM 1&2 Clip on the M/E-1 bank.

Note

To use a clip transition effectively, the image from the frame memory clip being played back during the clip transition should be seen in the M/E-1 program output. For example, inserting a key using frame memory output 1 and frame memory output 2.

1 Display the M/E-1 >Misc >Transition menu, and in the <Transition Type> group select “FM1&2 Clip.”

2 Press [Clip Transition].

The Clip Transition menu appears.

524 Clip Transition Operations