bBank selection buttons
BANK0 (bank 0): Assigns the memory recall section to bank 0, of registers 1 to 10.
BANK1 (bank 1): Assigns the memory recall section to bank 1, of registers 11 to 20.
BANK SEL (bank selection): After pressing this button, press a button in the memory recall section to select banks 0 to 9.
cMemory recall section
This consists of 12 buttons with LCDs. These display changes, according to various operation modes.
dUNDO button
UNDO: After recalling a register, press this button to return to the state before recalling the register.
When contents have been saved to a register, hold down the [STORE STATS] button and press this button to return the register to its state before the save operation.
STORE STATS (store status): When a save or delete operation has been carried out on a register, this button lights amber. After saving to a register, hold down this button and press the relevant register button to delete the data in the register. Again, after a save operation on a register, hold down this button and press the [UNDO] button to restore the register to its state before the save operation.
eXPT HOLD
display
A bus for which
fNumeric display
Depending on the operation mode, this shows the pattern number of a wipe or
DME wipe, a bank number, a register number, a transition rate, and so on in up to four digits.
266 Names and Functions of Parts of the Control Panel