4 Key snapshot setting buttons

Panel Control and Menus 2 Chapter

Downstream Key Control Block

1Key delegation buttons

5 Key source name display/key snapshot buttons

DSK1

DSK2

UNDO

WIPE

DME

K-SS

DSK3

DSK4

SHIFT

MIX

CUT

K-SS

STORE

 

 

 

 

 

DSK1

 

DSK2

DSK3

 

DSK4

ON

 

ON

ON

 

ON

TAKE

 

TAKE

TAKE

 

TAKE

2 Independent key transition type selection buttons

3Independent key transition execution section

aKey delegation buttons

Press one of the [DSK1] to [DSK4] buttons to delegate this control block to the corresponding keyer.

Using the Setup menu, it is possible to delegate this control block to key 1 to key 4 of the M/E bank.

While these buttons are held down, you can select a key source with the cross-point buttons for the key bus.

Pressing one of these buttons twice in rapid succession changes its state so that you can make cross-point selections on the corresponding key bus.

bIndependent key transition type selection buttons

Press one of these buttons, turning it on, to select the downstream key transition type. MIX: Carry out a dissolve with the key

selected with the key delegation buttons.

WIPE: Carry out a wipe with the key selected with the key delegation buttons.

DME: This switches the key selected with the key delegation buttons, using a DME wipe.

CUT: Instantaneously insert or delete the key selected with the key delegation buttons.

306 Names and Functions of Parts of the Control Panel