To adjust the edge fill color
When [DROP BDR] or [SHDW] is selected, the [MORE] button lights amber. Pressing the [MORE] button to turn it green then allows you to adjust the edge fill color parameters with the knobs.
Knob | Parameter | Adjustment | Setting values |
|
|
|
|
1 | Luminance | Luminance | 0 to 100 |
|
|
|
|
2 | Saturation | Saturation | 0 to 100 |
|
|
|
|
3 | Hue | Hue | 359 to 0 |
|
|
|
|
4 | Density | Density | 0 to 100 |
|
|
|
|
Setting the outline parameters
When the [OUTLINE] button is lit green, the parameter settings depend on the key type and whether the separate edge function is active. To activate the separate edge function, press [Separate Edge], setting it on, in the Edge menu for the key.
• Separate edge off
Knob | Parameter | Adjustment | Setting values |
|
|
|
|
1 | Width | Outline width | 0 to 8 a) |
|
|
| (0 to 100) b) |
4 | Density | Outline density | 0 to 100 |
|
|
|
|
a)In the “4H mode” and when [Fine Key] (page 393) is on, the setting value range is 0 to 4.
b)When a wipe pattern key or key wipe pattern key is selected as the key type
•Separate edge on
The outline width settings can be made independently for left, right, top, and bottom sides. The separate edge function is only available when luminance key, linear key, or chroma key is selected as the key type.
Knob | Parameter | Adjustment | Setting values |
|
|
|
|
1 | Top | Top edge width | 0 to 8 a) |
2 | Left | Left edge width | 0 to 8 a) |
3 | Right | Right edge width | 0 to 8 a) |
4 | Bottom | Bottom edge width | 0 to 8 a) |
a) In the “4H mode” and when [Fine Key] (page 393) is on, the setting value range is 0 to 4.
When [Outline] is selected with separate edge on, the [MORE] button lights amber. Pressing the [MORE] button to turn it green then allows you to adjust the key fill density parameter with a knob.
412 Key Setting Operations With the Key Control Block