1Color palette 
buttons
2Operation buttons
3Color display 
4Numeric keypad
aColor palette buttons Press one of these to enter the corresponding color in the display. By default the following settings are available.
First row: white, yellow, cyan, green
Second row: magenta, red, blue, black
Third row: all black
bOperation buttons
Set: If you press any color palette button with this button held down, the color shown in the color display is assigned to the color palette button.
Copy: If you press a color palette button with this button held down, the color is used as the source for copying. Next press a different color palette button to copy to that button.
Swap: If you press two color palette buttons in sequence with this button held down, the two colors are swapped.
Default: If you press any color palette button with this button held down, the color palette button is set to the default color.
cColor display
This shows the setting color, and the parameters (LUM, SAT, and HUE).
By adjusting the parameters with the knobs, you can create any color.
If a parameter value is outside the permitted range for RGB (0 to 255), the indication “Illegal Color” appears, and this is adjusted to a value in range.
Cancel: Pressing this button returns to the state when the color palette window was opened.
dNumeric keypad
Use this to enter numeric values for parameters.
For details of use, see page 330.
334 Basic Menu Operations