independently. The separate edge function is only valid when a luminance key, linear key, or chroma key is selected as the key type.
Knob | Parameter | Adjustment | Setting values |
|
|
|
|
1 | Top | Top edge width | 0.00 to 8.00 a) |
2 | Left | Left edge width | 0.00 to 8.00 a) |
3 | Right | Right edge width | 0.00 to 8.00 a) |
4 | Bottom | Bottom edge width | 0.00 to 8.00 a) |
5 | Density | Density | 0.00 to 100.00 |
|
|
|
|
a)In the “4H mode” and when [Fine Key] (page 393) is on, the setting value range is 0.00 to 4.00.
When drop border or shadow is selected: The setting parameter values depend on the on/off setting of key drop and the selection of 4H mode/ 8H mode (see page 54).
• “Key drop OFF” mode
Knob | Parameter | Adjustment | Setting values | |
|
|
|
|
|
1 | Width | Width | 0.00 to | 8.00 |
|
|
|
| |
2 | Position | Position | 359.99 to 180.00 | |
|
|
|
|
|
3 | Density | Density | 0.00 to | 100.00 |
|
|
|
|
|
• “Key drop ON” mode
Knob | Parameter | Adjustment | Setting values | |
|
|
|
|
|
1 | Width | Width | 0.00 to | 8.00 a) |
2 | Position | Position | 359.99 to 0.00 | |
|
|
|
|
|
3 | Density | Density | 0.00 to | 100.00 |
|
|
|
|
|
a)In the “4H mode” and when [Fine Key] (page 393) is on, the setting value range is 0.00 to 4.00.
When emboss is selected:
Knob | Parameter | Adjustment | Setting values | |
|
|
|
|
|
1 | Width | Width | 0.00 to | 4.00 |
|
|
|
| |
2 | Position | Position | 359.99 to 0.00 | |
|
|
|
|
|
3 | Density a) | Density | 0.00 to | 100.00 |
a)The Density adjustment only affects the key edge. This can be adjusted separately from Key Density, and if Key Density is set to 0.00, the embossed edge effect only can be applied.
Key Setting Operations Using Menus 391