Selection of signals linked with the audio mixer

When you select a signal in a switcher bank background A row or AUX bus control block which is set to be linked with the audio mixer, the program output of the audio mixer follows the signal selection.

For details of the setting, see Chapter 16, “Cross-Point Settings (Xpt Assign menu)” (Volume 2).

Note

•For details of audio mixers that can be connected, contact your Sony service or sales representative.

•When the signal is switched with a snapshot, keyframe, and so on, the audio mixer is not linked.

•When bus fixed mode is selected in setup (see page 45), the audio mixer program output is linked to the bus output as the background.

Signal Name Display

You can attach a name (source name) to each signal assigned to a cross-point button, with a maximum of 16 characters.

•The source name displays in the cross-point control block and auxiliary bus control block show the source names of the video signals assigned to numbers 1 to 31.

•To display the source names for numbers 32 to 62, press the [SHIFT] button to the right of the source name displays.

•To display the source names of the key signals assigned to buttons, hold down the [SPLIT] button in the key control block or the [KEY] button in the auxiliary bus control block.

Colors of lit cross-point buttons

In a particular row of cross-point buttons, only the last pressed button is effective, and lights amber or red. The amber indicates the “low tally” state, and the red indicates the “high tally” state, to indicate whether or not the selected signal appears in the final output video.

Significance of colors of lit cross-point buttons

Color

State

Significance

 

 

 

Amber

Low tally

Does not appear in final output video

 

 

 

Red

High tally

Appears in final output video

 

 

 

Signal Selection 33