Independent Key Transition Control Block (Simple Type)
The left side of this control block controls | In setup you can assign any key to either |
key 3, and the right side controls key 4. | side of this control block. For details, see |
The control block for key 3 only is | “Assigning Keys to the Independent Key |
described as an example, but the operations | Transition Control Block (Simple Type)” in |
on the key 4 control block are the same. | Chapter 16 (Volume 2). |
3
4Key source name display/key snapshot buttons
WIPE | DME | WIPE | DME | ||
SHIFT | MIX | CUT | SHIFT | MIX | CUT |
| KEY3 |
|
| KEY4 |
|
| ON |
|
| ON |
|
| TAKE |
|
| TAKE |
|
2Independent key transition execution section
1Independent key transition type selection buttons
aIndependent key transition type selection buttons
Press one of the following buttons, turning it on, to select the independent key transition type.
MIX: Faded in or out.
WIPE: Inserted or deleted with a wipe.
DME: Switches the key with a DME wipe.
CUT: Inserted or deleted instantaneously.
SHIFT: This has the following functions.
•When setting is made in the Setup menu to allow a different transition type for inserting or deleting a key, it is possible to display and set the transition type after the next transition while this button is held down.
304 Names and Functions of Parts of the Control Panel