Product name

Model No.

Switcher

 

 

 

Switcher Upgrade

BZS-8500M

MVS-8000G

Software

 

 

BZS-8510M

MVS-8000GSF

 

 

 

 

The following software options are also required depending on the number of M/E banks.

Product name

Model No.

Switcher

 

 

 

 

Mix/Effect

BZS-8520M

MVS-8000GSF 2M/E system or

Upgrade Software

 

MVS-8000G 3M/E system

 

 

 

 

 

 

BZS-8520M and BZS-8530M

MVS-8000G 4M/E system

 

 

 

 

To use the software, you are required to input an install key.

For the method of inputting an install key, see “Installation and Device Setup (Install/Unit Config Menu)” in Chapter 16 (Volume 2).

Format converter (for MVS-8000G only)

Installing the MKS-8450G Format Converter Board in the switcher enables the following signal video format conversions.

•Up-conversion: from SD (4:3) to HD (16:9)

•Down-conversion: from HD (16:9) to SD (4:3)

•Cross-conversion: from HD (720P) to HD (1080i), or from HD (1080i) to HD (720P)

The maximum number of input signals for which format conversion is possible is 16 (or 8 when only one MKS-8450G board is installed), and the maximum number of output signals is 4 (2 for output on the MVS-8000GSF).

Notes

•After format conversion, input and output signals have one-frame delays with respect to the reference signals.

•It is not possible to apply the safe title function to output signals subjected to format conversion.

•When the input reference signal for HD system is set to Tri Sync, the format converter function is not available.

For details, see “Setting the Signal Format (Format Menu)” in Chapter 16 (Volume 2).

Format combinations allowing conversion

The supported combinations of switcher signal format and format converter (inputs 1 to 8 and inputs 9 to 16) are as follows.

190 Setup