Output

Fixed assigned outputs

 

connector

 

 

 

 

 

Standard mode

Multi-program mode

DSK mode a)

 

 

OUT17

Program

P/P OUT1 b)

Program 1

OUT18

Program

P/P OUT1 b)

Program 2

OUT19

Preview

P/P OUT2 b)

Key preview 1

OUT20

Clean

P/P OUT3 b)

Key preview 2

OUT21

Key preview

P/P OUT4 b)

Clean 1

OUT22

Preset

Preset

Clean 2

 

 

 

 

 

a)In DSK mode, the backgrounds that can be selected in the PGM Config menu are restricted to background 1 and background 2.

b)Depends on the setting in the Engineering Setup >Switcher >Config >M/E Output Assign menu. OUT5 and OUT6 cannot be used.

Connectors for which a P/P row output signal can be selected

For an edit preview bus or AUX bus assigned to output connector OUT23 or OUT24, you can select a P/P row output signal.

If these buses are assigned to other than OUT23 or OUT24, then it is not possible to select a P/P row output signal. (Assigning these buses to the two connectors is recommended.)

Output connector

Assignable bus

 

 

OUT23

Edit preview bus

 

 

OUT24

AUX bus

 

 

Format converter output restrictions

On the MVS-8000G, the signal output from the format converter output connectors (FC1, FC2) can be assigned in either of the following ways.

•Out#15-16:Assignment fixed, signals OUT15 (for FC1), and OUT16 (for FC2).

•Out#17-22:Select from the OUT17 to OUT22 signals. (It is not, however,

possible to select the same signal for FC1 and FC2.)

It is not possible to select FC1 and FC2 differently. For example, it is not possible to select “Out#15-16” for FC1 and “Out#17-22” for FC2.

FC3 and FC4 always have the same signals assigned: OUT39 and OUT40 respectively, and therefore it is not possible to select OUT17-OUT22.

Logical assignment of the physical PGM/PST

In the Engineering Setup >Switcher >Config >Logical M/E Assign menu, it is not possible to assign the physical PGM/PST as a logical PGM/PST.

In the <Logical M/E to Physical P/P> group, you can select from M/E-1, M/E- 2, and M/E-3.

Functions 8000-MVS 1 Chapter

Simple P/P Software 229