Selecting a DME wipe pattern by a menu operation

1 In the M/E-1 >DME Wipe menu, select HF1 ‘1ch’ for one-channel mode, HF2 ‘2ch’ for two-channel mode or HF3 ‘3ch’ for three-channel mode.

2 Select the desired DME wipe pattern group with one of the following buttons.

•Slide/Squeeze: slide and squeeze

•Split/Door: split and door

•Flip Tumble: flip tumble

•Mirror/Sphere: mirror and sphere

•Character Trail: character trail

•Wave/Ripple: wave and ripple

•Page Turn/Roll: page turn and page roll

•Frame I/O/PinP: frame in/out and picture-in-picture

•2D Trans/3D Trans: 2D trans and 3D trans

•Sparkle/Split Slide: sparkle and split slide

•Mosaic/Defocus: mosaic and defocus

•Brick: brick

•User Program: user programmable DME

Selectable DME wipe pattern groups in one-channel mode: All of the above groups except for Brick.

Selectable DME wipe pattern groups in two-channel mode: Slide/ Squeeze, Page Turn/Roll, Frame I/O, PinP, 3D Trans, Brick and User Program.

Selectable DME wipe pattern groups in three-channel mode: User Program and Brick.

For details of DME wipe patterns, see “Types of DME Wipe Pattern” (page 72) and “DME Wipe Pattern List” in Appendix (Volume 1) (page 566).

The patterns from the selected pattern group appear on the screen.

3 Press the button to select the desired pattern.

Note

For a key transition, the page turn, page roll and picture-in-picture cannot be used.

Adjusting DME wipe pattern parameters

Of the DME wipe patterns, the following have parameters that can be adjusted.

Wipes DME 6 Chapter

Basic Procedure for DME Wipe Settings 467